Share:
Application Procedures
Wire brush and wipe the surface clean and as dry as possible. Apply the Wax-Tape Primer by hand, rubbing and pressing the primer firmly onto the surface, especially if the surface is wet, cold or rusty, to displace any moisture and ensure adhesion to the surface. Trenton Wax-Tape wraps may be applied immediately.
Packaging
1-gallon cans (4 gallons/case) 32 lbs/case
Specifications
Color: Brown
Coverage (approx.): 100 sq ft/gal (2.5 m²)/L
Flash point: 350°F minimum
Temperature of product
for application: 40°F – 100°F
Dielectric strength: >100 volts / mil
Max operating temperature: 120°F
Minimum substrate
application temperature: 0°F
Solids content: 100%
Advantages
- Goes on easily by hand
- Displaces moisture
- Penetrates surface rust
- Facilitates
wetting
of surfaces - Only a thin coat is required
- No waiting for drying or curing
- No mixing, thinning or stirring
- Compatible with other coatings
- Nontoxic, nonflammable, noncarcinogenic, no VOCs
Inquiry - Wax-Tape® Primer (Brown)
