Share:
Application Procedures
Fill-Coat #2 is shipped directly to the jobsite in 55 gallon drums and pumped (at temperatures above 55°F) by air driven mastic pump directly into the casing through one casing vent until it flows from the opposite vent. Fill-Coat #2 can be heated and pumped as a liquid if desired. A 10:1 ratio mastic pump with follower plate is available from Trenton on a rental basis.
Packaging
55 gallon drums
Specifications
| Color | Dark Brown |
| Specific Gravity at 60°F | .80 – .90 |
| Pour Point | 80 – 100°F |
| Flash Point | 300°F |
Advantages
- Presents galvanic and atmospheric corrosion within casings
- Displaces and prevents re-entry of water in casing
- Satisfies DOT requirements for shorted casings
- Carrier pipe can be removed
- Inert, non-hazardous, and non-volatile
- Pumpable at temperatures above 55°F without heating
- Economical for small quantity requirements
Quantity Requirements
| Pipe x Casing Size | (in inches) Gallon/Foot |
| 4 x 8 | 1.8 |
| 6 x 10 | 2.3 |
| 8 x 12 | 3.0 |
| 10 x 14 | 2.5 |
| 12 x 16 | 2.9 |
| 14 x 20 | 7.2 |
| 16 x 20 | 4.8 |
| 20 x 24 | 5.9 |
| 22 x 26 | 6.0 |
| 24 x 30 | 11.4 |
| 26 x 30 | 7.3 |
| 30 x 34 | 8.3 |
| 30 x 36 | 14.1 |
| 36 x 42 | 16.4 |
Inquiry - Fill-Coat® #2 Cold-Applied Wax Casing Filler
