Share:


Fill-Coat® #6 Cold-Applied Wax Casing Filler

Application Procedures

Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps (1, 5, or 50 gallon capacity). The material is pumped into the annulus of the casing until the casing is full. The casing ends can be sealed with Trenton Fill-Putty™, Trenton #2 Wax-Tape® or an epoxy filler once it is full.

Packaging

55-gallon drums

Advantages

  • Non-Melting
  • Anti-Corrosive
  • Water Resistant
  • Dielectric
  • Inert
  • Non-Toxic
  • Non-Flammable
  • Pliable

Specifications

Flash Point ASTM D92 greater than 300°F
350°F minimum
Specific Gravity 0.946
Temperature Range 30°F to 225°F
Color Dark Brown
Consistency grease-like
Dielectric Strength Greater than 100 Volts per mil
Density ASTM D1475 7.898 lbs. per gal


 Inquiry - Fill-Coat® #6 Cold-Applied Wax Casing Filler