Share:
Application Procedures
Fill-Coat #6 can be installed by a variety of portable air powered mastic pumps (1, 5, or 50 gallon capacity). The material is pumped into the annulus of the casing until the casing is full. The casing ends can be sealed with Trenton Fill-Putty™, Trenton #2 Wax-Tape® or an epoxy filler once it is full.
Packaging
55-gallon drums
Advantages
- Non-Melting
- Anti-Corrosive
- Water Resistant
- Dielectric
- Inert
- Non-Toxic
- Non-Flammable
- Pliable
Specifications
| Flash Point | ASTM D92 greater than 300°F 350°F minimum |
| Specific Gravity | 0.946 |
| Temperature Range | 30°F to 225°F |
| Color | Dark Brown |
| Consistency | grease-like |
| Dielectric Strength | Greater than 100 Volts per mil |
| Density | ASTM D1475 7.898 lbs. per gal |
Inquiry - Fill-Coat庐 #6 Cold-Applied Wax Casing Filler
