Application Procedures
Wire brush and wipe the surface clean of any loose coating, rust, scale and foreign matter. Then apply Temcoat by hand directly to the surface. At higher temperatures Temcoat can be applied by brush. On wet surfaces rub and press firmly to displace moisture and ensure adhesion. For belowground applications to protect Temcoat from mechanical abrasion, overwrap with Poly-Ply™, Guard-Wrap™, # 1 Wax-Tape® or #2 Wax-Tape®. For aboveground applications, overwrap with #2 Wax-Tape.
Packaging
3-gallon pails (approx. 24 lb/pail)
1-gallon can (4 gallons/case)
32 lb/case
Specifications
Temcoat | Temcoat 3000 | |
Color | Brown | Brown |
Pour point | non-melting | non-melting |
Flash point | 350°F minimum | 350°F minimum |
Dielectric strength | 100 volts per mil | 100 volts per mil |
Application temperature | 32°-200°F | 0°-230°F |
Advantages
- Withstands high ambient temperatures
- Goes on easily by hand
- No primer required
- No waiting for drying or curing
- Nonhazardous, no VOCs
- Minimal surface preparation
- Can be applied to wet pipe
Inquiry - Temcoat™ Primer & Temcoat™ 3000 Primer